Precision Steel Tube
Precision steel tube is an essential auxiliary product for aluminum foil manufacturers . Its roundness,straightness,wall thickness tolerance , surface quality and other factors directly affect the quality of aluminum foil when it is split and winded on slitting machines. Especially for those companies which manufacture aluminium foil thickness ranging from 0.005mm to 0.009mm .Our company specializes in the manufacture of various types of precision cold rolling steeltube and we have already mastered the key technology of production.That using our precision steel tube can greatly improve the efficiency of production and save the production cost.
We produce precision steel tube according to corresponding national standards as follows:
GB/T 3274-2007 Hot-rolled plates and strips of carbon structural steels and high strength low alloy structural steels
GB/T 700 Carbon structural steel
GB/T 244 Metallic materials- Tube- Beng test method
GB/T 228.1 Metallic materials- tensile testing
GB/T 13793 Steel pipes with a longitudinal electric (resistance) weld
GB/T 2102 Acceptance,packing,marking and quality certificate of steel pipe
Common spec are φ76.2*2、φ150*4、φ150*6、φ152.4*3.5、φ152.4*4、φ152.4*6 and so on.
Main technical parameters of steel tube are shown in the following table :
Item | Technical Parameters | ||||||||||||
Material | Cold - rolled welded steel pipe,grade Q235b or other low carbon steel | ||||||||||||
Chemical Composition(%) | Alloy | C | Si | Mn | S | ||||||||
Q235 or other low carbon steel | ≦0.25 | ≦0.35 | 0.1-0.7 | ≦0.045 | |||||||||
Straightness(mm/m) | <0.3 (Including the finished steel pipe core after cutting) | ||||||||||||
Mechanical Property | Tensile strength:Rm≧440MPa;elongation:A≧6%。ID 300 steel core Rm≧500MPa、A≧21% | ||||||||||||
ID/OD (mm) | 76/ 80 | 76/ 82 | 150/ 158 | 150/ 162 | 152/ 160 | 304/ 325 | 151/ 163 | 150/ 166 | 152.4/ 168.4 | 202/ 210 | 152.4/ 164.4 | ||
ID Tolerance (mm) | +0.3 +0.1 | +0.3 +0.1 | +0.50 +0.35 | +0.50 +0.35 | +0.70 +0.55 | +1.0 -1.0 | +0.35 +0.00 | +0.4 +0.00 | +0.4 +0.00 | +1.0 +0.00 | +0.3 +0.05 | ||
Wall Thickness(mm) | 2.0 | 3.0 | 4.0 | 6.0 | 4.0 | 9.5 | 5.8 | 8.0 | 8.0 | 4.0 | 6.0 | ||
Wall THK Tolerance(mm) | ±0.2 | ±0.2 | ±0.2 | ±0.2 | ±0.2 | ±0.5 | ±0.1 | ±0.2 | ±0.2 | +0.2 +0.0 | +0.0 -0.25 | ||
OD Tolerance(mm) | +0.3 +0.1 | +0.3 +0.1 | +0.50 +0.35 | +0.50 +0.35 | +0.70 +0.55 | +0.00 -0.50 | +0.35 +0.00 | +0.4 +0.00 | +0.4 +0.00 | +0.4 +0.00 | +0.3 -0.2 | ||
Roundness(mm) | <0.10 | <0.15 | <0.15 | <0.15 | <0.15 | <0.10 | <0.15 | ≦0.20 | ≦0.20 | <0.30 | <0.12 | ||
Length Variation (mm) | Long tube : Order length between 6-6.5 meters, same batch length deviation (0/50mm); Finished pipe core :length specification±0.5mm | ||||||||||||
Appearance Quality | 1. Smooth internal and external surface, no bumps, concave convex marks and machining marks, etc. Local pits can be allowed within 30mm distance from the edge of the tube core. The depth of abrasion and tiny scratch should be ≦0.05 mm. 2. The surface of the tube core is clean, free of iron chips, rust, dust, water stains, oil stains. 3. Two end surfaces of the finished steel pipe core shall be perpendicular to the steel pipe axis, the cut shall be free of burrs and the end surface shall be flat. |
Precision Steel Tube
Precision steel tube is an essential auxiliary product for aluminum foil manufacturers . Its roundness,straightness,wall thickness tolerance , surface quality and other factors directly affect the quality of aluminum foil when it is split and winded on slitting machines. Especially for those companies which manufacture aluminium foil thickness ranging from 0.005mm to 0.009mm .Our company specializes in the manufacture of various types of precision cold rolling steeltube and we have already mastered the key technology of production.That using our precision steel tube can greatly improve the efficiency of production and save the production cost.
We produce precision steel tube according to corresponding national standards as follows:
GB/T 3274-2007 Hot-rolled plates and strips of carbon structural steels and high strength low alloy structural steels
GB/T 700 Carbon structural steel
GB/T 244 Metallic materials- Tube- Beng test method
GB/T 228.1 Metallic materials- tensile testing
GB/T 13793 Steel pipes with a longitudinal electric (resistance) weld
GB/T 2102 Acceptance,packing,marking and quality certificate of steel pipe
Common spec are φ76.2*2、φ150*4、φ150*6、φ152.4*3.5、φ152.4*4、φ152.4*6 and so on.
Main technical parameters of steel tube are shown in the following table :
Item | Technical Parameters | ||||||||||||
Material | Cold - rolled welded steel pipe,grade Q235b or other low carbon steel | ||||||||||||
Chemical Composition(%) | Alloy | C | Si | Mn | S | ||||||||
Q235 or other low carbon steel | ≦0.25 | ≦0.35 | 0.1-0.7 | ≦0.045 | |||||||||
Straightness(mm/m) | <0.3 (Including the finished steel pipe core after cutting) | ||||||||||||
Mechanical Property | Tensile strength:Rm≧440MPa;elongation:A≧6%。ID 300 steel core Rm≧500MPa、A≧21% | ||||||||||||
ID/OD (mm) | 76/ 80 | 76/ 82 | 150/ 158 | 150/ 162 | 152/ 160 | 304/ 325 | 151/ 163 | 150/ 166 | 152.4/ 168.4 | 202/ 210 | 152.4/ 164.4 | ||
ID Tolerance (mm) | +0.3 +0.1 | +0.3 +0.1 | +0.50 +0.35 | +0.50 +0.35 | +0.70 +0.55 | +1.0 -1.0 | +0.35 +0.00 | +0.4 +0.00 | +0.4 +0.00 | +1.0 +0.00 | +0.3 +0.05 | ||
Wall Thickness(mm) | 2.0 | 3.0 | 4.0 | 6.0 | 4.0 | 9.5 | 5.8 | 8.0 | 8.0 | 4.0 | 6.0 | ||
Wall THK Tolerance(mm) | ±0.2 | ±0.2 | ±0.2 | ±0.2 | ±0.2 | ±0.5 | ±0.1 | ±0.2 | ±0.2 | +0.2 +0.0 | +0.0 -0.25 | ||
OD Tolerance(mm) | +0.3 +0.1 | +0.3 +0.1 | +0.50 +0.35 | +0.50 +0.35 | +0.70 +0.55 | +0.00 -0.50 | +0.35 +0.00 | +0.4 +0.00 | +0.4 +0.00 | +0.4 +0.00 | +0.3 -0.2 | ||
Roundness(mm) | <0.10 | <0.15 | <0.15 | <0.15 | <0.15 | <0.10 | <0.15 | ≦0.20 | ≦0.20 | <0.30 | <0.12 | ||
Length Variation (mm) | Long tube : Order length between 6-6.5 meters, same batch length deviation (0/50mm); Finished pipe core :length specification±0.5mm | ||||||||||||
Appearance Quality | 1. Smooth internal and external surface, no bumps, concave convex marks and machining marks, etc. Local pits can be allowed within 30mm distance from the edge of the tube core. The depth of abrasion and tiny scratch should be ≦0.05 mm. 2. The surface of the tube core is clean, free of iron chips, rust, dust, water stains, oil stains. 3. Two end surfaces of the finished steel pipe core shall be perpendicular to the steel pipe axis, the cut shall be free of burrs and the end surface shall be flat. |
+86 511 80890577
+86 511 80890579
+86 511 80890580
+86 511 80899803